![banner80.bmp](sitebuildercontent/sitebuilderpictures/banner80.bmp)
|
Irrigation systems often create run-off which wastes water,
creates soil erosion, and pollutes the storm water drains. The problem is caused by the absorption rate of the soil or vegetation
being less than the application rate from the sprinkler.
The SmartSoak(tm) solves this problem by subdividing the
zone run time into fractions of a minute, typically turning the valve on for 45 seconds, then shutting it off for a rest period
of 45 to 240 seconds. During the rest period, the water is allowed to “soak” into the vegatation. After the rest period,
the valve is turned-on again and the process is repeated over and over for the entire zone run time. In this way, more water
is absorbed into the ground and less runs off.
The SmartSoaktm is a small electronic device, designed to be installed
in between your existing irrigation timer(sprinkler controller) and the irrigation solenoid valve. It works with industry
standard 24VAC sprinkler valves and controllers you already have.
The SmartSoaktm has 4 user selectable time patterns.
For hard soils and steep slopes, use the shorter run time and longer rest period options. For flat landscaping or porous
soils, use the longer run time and shorter rest periods. Select the pattern that best suits your needs by observing the absorption
rate of your sprinklers.
|
![SPLIT.bmp](sitebuildercontent/sitebuilderpictures/SPLIT.bmp)
The
SmartSoak(tm) subdivides the zone run time into fractions of a minute, typically turning the valve on for 45 seconds, then
shutting it off for a rest period of 45 to 240 seconds. During the rest period, the water is allowed to “soak” into the landscaping.
After the rest period, the valve is turned-on again and the process is repeated over and over for the entire zone run time.
In this way, the water is absorbed into the ground and doesn’t run-off.
|
![soakit2.bmp](sitebuildercontent/sitebuilderpictures/soakit2.bmp)
Typical
Installation. Please see the installation instructions provided with the product before installing.
|
![P1010027.JPG](sitebuildercontent/sitebuilderpictures/P1010027.JPG)
The
SmartSoaktm is a small electronic control unit that connects to the sprinkler valve.
|
|
Ready to buy? Follow this link to PURCHASE
the SmartSoak Now! Feel free to call or email for more information:
Cadent Technologies, Inc 42244 Remington Ave. Temecula,
Ca. 92590 Phone: (951) 296 6104 Fax: (951) 296 6107
www.cadentech.com
sales@cadentech.com
|